Hambini Racing BSA Bottom Bracket 30mm Long Axle
£291.00 Ex. VATThis bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket
Showing all 9 results
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket
This bottom bracket is designed to interface an MTB Shimano 24mm Hollowtech 2Ā Crankset with a bike frame that uses a BSA Bottom Bracket.
This bottom bracket is designed to interface a SRAM DUBĀ Crankset with a bike frame that uses a BSA Bottom Bracket.
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket. It is made of Titanium
This bottom bracket is designed to interface a SRAM DUBĀ Crankset with a bike frame that uses a BSA Bottom Bracket. It is made of Titanium
This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.
End of content
End of content
Subtotal: £268.00