Hambini Titanium Racing BSA Bottom Bracket SRAM DUB
£447.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a BSA Bottom Bracket. It is made of Titanium
1 in stock
Description
- Made from Titanium
- BSA 68mm Threaded (1.37 x 24TPI), Often referred to as English, BSC or ISO threading.
- The drive side has a Left Handed Thread, Non Drive Side has a Right Handed Thread
- 29mm (28.99) DUB compatible
- The drive and non-drive sides are aligned via an internal male/female sleeve
- Top of the range 6806 SKF/NTN/FAG/NSK bearings fitted as standard
- Non contacting Seals
- It is extremely important that any frame this BB is fitted to has a flat face (0.02mm) that is perpendicular to the threads. Diameter of 52mm
- Tightening Torque of 8Nm (BSA Bottom brackets will self-tighten)
- Fitting instructions are here,
- The fitting tool to install this is available here
This bottom bracket features the largest bearings of any commercially available unit for DUB axles. They are standard 6806 bearings which have a load rating that is significantly higher than the 4029 bearings used by other manufacturers.
Please be aware that DUB Axles vary in DBCA and you may need additional spacers. Please read the guidance on this here
Contemporary frames from the likes of Specialized and Cannondale use threaded BSA bottom brackets. This Hambini Ti bottom bracket was designed to address a growing trend of fitting large-format axles (SRAM AXS/DUB and 30mm) into BSA shells. Large-format axles result in thin sidewalls in the threaded regions which cause undesirable bending and twisting. The reduction in cross-sectional area is offset in Hambini Ti Bottom brackets with the use of Titanium which is substantially stronger and stiffer than the aluminium alloys used by other manufacturers.
4 reviews for Hambini Titanium Racing BSA Bottom Bracket SRAM DUB
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Kevvo –
I bought myself a new Specialized Tarmac, this now comes with a threaded shell. My last one had a BB30 OSBB. I had a Hambini BB in that one and could not have been happier.
I bought this without thinking twice, all of those moaners on internet forums have obviously not tried Hambini BB’s. Yes it is expensive but you’ll quickly forget about that when you have hassle free, silent, drag free cycling. First class finish, technical support and a quality product.
The fitting was perfect, the cranks spin forever. The OE sram BB looks like a cheap knock off compared to this.
mark m. –
Quality BB, no plastic here, precision machined titanium, easy install be mindful of the low torque required 8Nm, the install tool is also quality my LBS was impressed with both the BB and tool , great communication with Hambini regarding my questions, Definitely recommend
Huang Teng Tan –
The absolute pinnacle in bicycle engineering.
The tolerance of the Titanium BB is even higher than the Aluminum version as it is not anodised. It is obvious when the male and female centre bits come together as the fit is snug (zero play).
When installed on my Tarmac SL7, the crank spin is absolutely smooth and only comes to a stop after 30 plus seconds.
Seeta T. –
Excellent product…