Hambini Titanium Racing Italian Bottom Bracket SRAM DUB
£487.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses an Italian Bottom Bracket. It is made of Titanium
2 in stock
Description
- Made from Titanium
- Italian Threaded 70mm 1.0mm Thread Pitch
- The drive side has a Right Handed Thread; Non Drive Side has a Right Handed Thread
- 29mm (28.99) DUB compatible
- The drive and non-drive sides are aligned via an internal male/female sleeve
- Top of the range 6806 SKF/NTN/FAG/NSK bearings fitted as standard
- Non contacting Seals
- It is extremely important that any frame this BB is fitted to has a flat face (0.02mm) that is perpendicular to the threads. Diameter of 52mm
- Fitting instructions are here,
- The fitting tool to install this is available here
This bottom bracket features the largest bearings of any commercially available unit for DUB axles. They are standard 6806 bearings which have a load rating that is significantly higher than the 4029 bearings used by other manufacturers.
Please be aware that DUB Axles vary in DBCA and you may need additional spacers. Please read the guidance on this here
This bottom bracket was designed for Italian threaded bike frames such as Pinarello and some boutique Italian brands. Italian frames have a minimal overhang of the bearing seats and thus stronger materials are required to maintain the same level of stiffness.
j.kyle55 –
Installed the Hambini Titanium Racing Italian BB SRAM Dub on my Pinarello F12! This is without a doubt the smoothest BB I have ever used, and given the fact I ride over 18,000kms every year I have used many bbs. I have another Hambini BB installed on my Titanium Gravel bike and both BBs are outstanding. Going forward this is the only bb I will ever install on my bikes.