-
Rated 5.00 out of 5
£318.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A83 Bottom Bracket (42mm Nominal Inside Diameter x 83mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (Topstone). The center section of this bottom bracket is extremely narrow to allow it to miss the cable guide on Topstone bikes.
-
£287.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long axle (minimum 90.5m DBCA) Crankset with a bike frame that uses an Italian Bottom Bracket.
-
Rated 5.00 out of 5
£279.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses an Italian Bottom Bracket (70mm). This is a popular bottom bracket used on Pinnarello Bikes
-
Rated 5.00 out of 5
£315.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses an Italian Bottom Bracket (70mm).
-
Rated 5.00 out of 5
£487.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses an Italian Bottom Bracket. It is made of Titanium
-
Rated 4.87 out of 5
£173.00 Ex. VAT
This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.
End of content
End of content
Hambini Racing T47i T47-86.5 Bottom Bracket Shimano Crankset (Trek)