Showing 1–12 of 16 results
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190318-133939-1-300x300.jpg)
Rated 4.94 out of 5
£186.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190602-212227-1-300x300.jpg)
Rated 4.96 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190602-212307-300x300.jpg)
Rated 4.99 out of 5
£278.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB386EVOassembledsramdub-1-300x300.png)
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 4.96 out of 5
£245.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![BB86 Necked](https://www.hambini.com/wp-content/uploads/2021/12/20210918-112757-scaled-300x300.jpg)
Rated 4.95 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). This bottom bracket has a narrowed center section to avoid obstructions, most Scott and BMC bikes require this variant of BB86 Bottom Bracket.
-
![BB86 BB92 Thread Together](https://www.hambini.com/wp-content/uploads/2021/09/20210907-184024-scaled-300x300.jpg)
Rated 5.00 out of 5
£269.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). The thread together design will fit in any BB86 frame and is especially suited for Giant Bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a SRAM GXP Crankset with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![BSA 30mm](https://www.hambini.com/wp-content/uploads/2021/10/20211011-224416-scaled-300x300.jpg)
Rated 4.83 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket
-
![](https://www.hambini.com/wp-content/uploads/2020/08/20200731-183724-scaled-300x300.jpg)
Rated 5.00 out of 5
£231.00 Ex. VAT
This bottom bracket is designed to interface an MTB Shimano 24mm Hollowtech 2Ā Crankset with a bike frame that uses a BSA Bottom Bracket.
-
![BSA SRAM DUB Bottom Bracket](https://www.hambini.com/wp-content/uploads/2021/09/20210905-194312-scaled-300x300.jpg)
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUBĀ Crankset with a bike frame that uses a BSA Bottom Bracket.
-
![Hambini T45 30mm](https://www.hambini.com/wp-content/uploads/2021/11/20211127-210126-scaled-300x300.jpg)
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
End of content
End of content