Hambini Bottom Bracket Review by China Cycling
Joe from China Cycling reviewed a Hambini Bottom bracket against a Token Cycling bottom bracket
A Hambini bottom bracket user from Canada sent this link to their mechanic installing a Hambini BB into a Cervelo bike frame. The music and install are quite therapeutic!
30mm cranks into BB86 bike frames – Avoid if you can… A common question I am often emailed about is asking if I can supply a bottom bracket that will allow a 30mm crank to be fitted into a BB86 bike frame. This post will talk through the many problems associated with this. BB86 uses…
This blog post will cover the installation of a Hambini Bottom Bracket in a Winspace T1500 Aero bike frame. It covers the bike frame, the bottom bracket selection and the potential problems that may arise.
Blind bearing pullers, initially created to remove bearings from rotating equipment without rear access, have been popularized for removing wheel bearings. Despite their increased use, these tools can inflict unnoticed damage on wheels. Primarily deployed in automotive and machinery maintenance, blind bearing pullers slide through the bearing, expand behind it, and retract, exerting a steady force without damaging surrounding areas. However, concerns arise when these tools are used without considering potential damage to internal preload spacers, causing potential legal repercussions for negligent installation in professional settings.
T47 is examined in engineering detail. Some of the quirks associated with the standard, the weights and the frame geometry limitations are discussed. Trek, Felt and Factor variations of T47 dimensional standars are covered.
No products in the cart.
Excellent reception and review of your exvellent engineering skills … nice one