Hambini Racing BB30A Bottom Bracket Shimano Crankset (Silver) Necked

(9 customer reviews)

£281.00 (£337.20 UK Customers)

This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A Bottom Bracket (42mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (CAAD).

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: BB30A-Shimano-Racing Edition (Silver) Necked Category:

Description

This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A Bottom Bracket (42mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (CAAD). The center section of this bottom bracket is extremely narrow to allow it to miss the cable guide on CAAD bikes.

Hambini Racing Bottom Bracket Overview

  • 20% stiffer than Hambini Standard Bottom Brackets
  • As used in the Pro-Peloton
  • Aerospace Tolerances for a no slop fit
  • One Piece design aligns the bearings perfectly, reducing the likelihood of creak
  • NTN Bearings fitted as standard. Ultra Low Friction in Road Applications and Fully Sealed NTN/FAG in MTB Applications
  • No Hammers are required to install or Remove the Bottom Bracket
  • Fully Serviceable, the bearings can be replaced quickly and easily
  • It is supplied with fitting adaptors in M12 (or 1/2 inch), a press or studbar will be required to facilitate installation
  • One year warranty on the bottom bracket body

Precision Engineered

Hambini Bottom Brackets are amongst the lowest friction bottom brackets in the world. They are used by recreational cyclists, road racers, triathletes and time trialists from around the globe. They are of proven design and are manufactured to Aerospace tolerances, using Aerospace materials by an Aerospace Engineer. These units are of a one piece construction which makes them inherently resistant to creak, they will maintain perfect bearing alignment and function under loads in excess of 4000W.

Hambini Bottom Bracket Reviewed by an Engineer

Hassle-Free Maintenance

All Hambini bottom brackets can be installed and removed with a conventional bearing press, they use a controlled method of installation using the recommended fitting adaptors, they require no hammers or specialized tooling for removal. Additionally, the wearing component – the bearings – can be serviced in situ or removed within just a few minutes. The bottom bracket has been designed to be fully rebuildable.

Unrivalled Performance

Unloaded bearing spin tests are a poor measure of frictional performance but they do highlight good bearing alignment. The link below is to a video of a Hambini Racing Bottom Bracket that had completed 10,000km

Class Leading Parasitic Drag Loss (Friction)

The graph below shows how Hambini bottom brackets perform in comparison to the bottom brackets of other manufacturers. The test conditions model real world cycling and more importantly mimics realistic frame tolerances. All of these tests have been conducted with an eccentricity of 0.1mm which is generally the maximum permitted in frame specifications – the reality is tolerances have been known to be much worse than this. Misalignment is more critical to friction than the type of bearing ball material, a slight misalignment can easily outweigh the difference between a top of the range NTN bearing and a mediocre ebay no name bearing. The results show that bottom brackets which have an element of structural linkage between the drive and non-drive sides (one piece/threaded etc) perform much better than those which are multi piece.

The high torque and low RPM of pedaling causes high Hertzian contact stresses on bearing surfaces which cause friction levels to change over time. Those bottom brackets which have used ceramic bearings, start off with fairly low levels of friction but over time their friction increases dramatically. The super hard ceramic balls grind a track into the comparatively soft bearing races causing friction to increase. This would be analogous to trying to drive a locomotive train on a road, the wheels would cut grooves into the road surface due to the huge difference in surface hardness.

Bottom Bracket Stiffness

A Hambini BB is a one piece bottom bracket. It actively contributes to the stiffness of the bike’s pedaling platform. Threaded and multi piece bottom brackets have an element of play in their design so they do not contribute anywhere near a comparative level of stiffness. Reviewers of Hambini BB’s often comment on their feeling of improved stiffness, this is due to them being one piece and undergoing a proprietary heat treatment process. This makes them stronger and stiffer. This is a difference the end user cannot see – but they can feel.

Support

A lot of support questions can be answered by visiting the support section.

Popular support topics:

Still need some help?

You can contact support on support@hambini.com or use the Contact Form

Additional information

Crankset Type

Shimano

Frame

BB30A

Manufacturer

Hambini

9 reviews for Hambini Racing BB30A Bottom Bracket Shimano Crankset (Silver) Necked

  1. George W.

    There are loads of BB’s you can buy to fit Shimano cranks in a CAAD12 frame with internal cable routing. But this is the only BB on the market in the world which is one-piece (to preserve alignment and stiffness) and doesn’t have a hole hacked in the side with a Dremel. Luckily, Hambini’s BB is perfect in every way and fitting it to the bike was the work of 5 minutes. My version was custom machined with a narrower diameter in the centre section to accommodate the internal cable routing in the CAAD12 BB shell – a proper engineering solution to all my problems. Out on the road it’s noticeably stiffer, and it’s completely silent. Would thoroughly advise buying a cr*p BB30 bike just so you can have the pleasure of fitting one of these things.

  2. Arndt B.

    Perfect! The communication was great, manufacturing (custom fabrication for a CAAD12) and delivery of the bottom bracket was fast. The BB itself even a layman can see that the manufacturing quality is on an extremely high level. It is now installed and doing its job without any problems, much better (and quieter) than the Cannondale BB30A nonsense that was previously in my CAAD12.

  3. Dejan Zivanovic

    Very satisfied with my purchase.

    Communication was exceptional. Delivery very fast and install was a breeze.

    I will definitely purchase one again when I get a new bike.

  4. Howard Gibbons

    Put one of these in a CAAD12 to get rid of creaking once and for all. Lovely bit of machining, it’s a pity to hide it away. Not cheap but you get a top quality product and great service from Hambini. ?

  5. Howard Gibbons

    Quality bit of engineering, Not cheap but you won’t find better. Excellent communications and service from Hambini.

  6. Adrian Jarvis

    Fitting the Hambini Racing BB to my Caad12 has been without a doubt the best improvement to my bike Barr none! No more creaking or clicking, just smooth and fast! I can hear the birds singing and the sound of my tyres gliding along the tarmac. These are simple sounds which we take for granted, but I’ve never been able to hear or enjoy them properly until now. There’s no getting around the high price, but I’m so glad I went ahead and bought it as it’s even better than I imagined! Just buy it and you will understand what I’m saying!

  7. David

    Fine engineering. Get a BB press with a lengthened threaded rod for easy installation. After two long rides to help wear in the bearings, the bike now feels much better than new.

  8. David Wiese

    Disney Princess Blanket Good

  9. Paul M.

    I’ve now got 600 miles on my Hambini BB and could not be happier. The improvement over the stock Cannondale setup is subtle but definitely noticeable: stiffer, more responsive, and no more creaks! Installation was a breeze. I made my own press using Hambini’s instructions and had zero issues. My CAAD12 feels like a new bike!

Add a review

Your email address will not be published. Required fields are marked *

Q & A

Question
Is this BB compatible with a stock Cannondale CAAD13 Disc 105? If so, does it increase the Q-factor in any way? SM asked on 4 November 2021
Answer
It has no effect on the Q factor, that is governed by the dimensions of the crank. If it is BB30A, then it should fit. The only issue can be any internal obstructions. There is a post from a user fitting one of these here https://www.hambini.com/hambini-bb30a-cannondale-caad-installation/ admin answered on 4 November 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
Will this fit a Cannondale Supersix Evo (2021) Nick Rennie asked on 1 August 2021
Answer
I think that bike will require a PF30A not a BB30A admin answered on 3 August 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
Is it possible to fit this on a BB30 frame as well? Broke my BB30A frame and could potentially get another frameset. Gerald asked on 3 June 2021
Answer
It will physically fit but one of the interfaces - the non drive side will only be partially seated. You will lose about 5mm of seating so it's more likely to creak and possibly fall out. It is not recommended. admin answered on 3 June 2021 store managerstore manager
Upvote (1) Downvote (0)
Loading

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Mail

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Mail

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information: