Showing 49–60 of 66 results
This bottom bracket is designed to interface a Shimano Hollowtech 2 (Dura Ace, Ultegra, 105 etc) or compatible crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. Please note that newer Colnago bikes are using T47 86.5 Bottom Brackets,The Picture is for illustration purposes
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
This bottom bracket is designed to interface a SRAM DUB 28.99mm (29.00mm) Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called Threadfit or T47i. This will also fit cranksets from the likes of Rotor, FSA, Magene and others who use a 24mm axle with 90.5mm DBCA – this is often called Shimano compatible.
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket. It is made of Titanium
End of content
End of content
No products in the cart.