Showing 1–12 of 13 results
-
Rated 4.94 out of 5
£186.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
Rated 4.96 out of 5
£245.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
Rated 4.95 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). This bottom bracket has a narrowed center section to avoid obstructions, most Scott and BMC bikes require this variant of BB86 Bottom Bracket.
-
Rated 5.00 out of 5
£269.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). The thread together design will fit in any BB86 frame and is especially suited for Giant Bikes.
-
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a SRAM GXP Crankset with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 4.80 out of 5
£309.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB 28.99mm (29.00mm) Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
£291.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes
End of content
End of content