-
Rated 4.90 out of 5
£453.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2Â Crankset with a bike frame that uses a BB65 Bottom Bracket (These are used exclusively on Look bikes).
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 4.80 out of 5
£309.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB 28.99mm (29.00mm) Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
£291.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes
-
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes
-
Rated 4.87 out of 5
£173.00 Ex. VAT
This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.
End of content
End of content