-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190318-133939-1-300x300.jpg)
Rated 4.94 out of 5
£186.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![Hambini BB65 LOOK Bottom Bracket](https://www.hambini.com/wp-content/uploads/2022/07/20220730-120127-scaled-300x300.jpg)
Rated 4.90 out of 5
£453.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2Â Crankset with a bike frame that uses a BB65 Bottom Bracket (These are used exclusively on Look bikes).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 4.96 out of 5
£245.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![BB86 Necked](https://www.hambini.com/wp-content/uploads/2021/12/20210918-112757-scaled-300x300.jpg)
Rated 4.95 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). This bottom bracket has a narrowed center section to avoid obstructions, most Scott and BMC bikes require this variant of BB86 Bottom Bracket.
-
![BB86 BB92 Thread Together](https://www.hambini.com/wp-content/uploads/2021/09/20210907-184024-scaled-300x300.jpg)
Rated 5.00 out of 5
£269.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). The thread together design will fit in any BB86 frame and is especially suited for Giant Bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a SRAM GXP Crankset with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190307-205742-scaled-300x300.jpg)
Rated 4.87 out of 5
£173.00 Ex. VAT
This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.
End of content
End of content