Showing 1–12 of 15 results
-
Rated 4.96 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
Rated 4.99 out of 5
£278.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
-
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
-
Rated 5.00 out of 5
£306.00 Ex. VAT
This bottom bracket is designed to interface a Shimano Hollowtech 2 (Dura Ace, Ultegra, 105 etc) or compatible crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. Please note that newer Colnago bikes are using T47 86.5 Bottom Brackets,The Picture is for illustration purposes
-
Rated 5.00 out of 5
£341.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 4.80 out of 5
£309.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB 28.99mm (29.00mm) Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
Rated 5.00 out of 5
£275.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
-
£291.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
End of content
End of content