NTN 6802 LLB 15x24x5 Ultra Low Friction Seal
£16.00 Ex. VAT
NTN 6802 LLB 15x24x5 Ultra Low Friction Seal Genuine Bearing,
Out of stock
Description
This is a Genuine NTN deep groove ball bearing
Technical Specifications
- CN normal clearance
- Teflon impregnated grease
- Premium Tier 1 supplier
- Most sizes are made in Japan, smaller sizes are made in Taiwan
NTN Corporation (Niwa, Tomoe, Nishizono) are one of the oldest bearing manufacturers in the world, with their roots dating back to central Japan in the early 20th century. They have been manufacturing for over 100 years.
Performance details
Bearing Vibration
Measuring vibration is an effective method of ascertaining how well a bearing is manufactured. High-frequency vibration levels, often called spike energy, detect minute microscopic flaws in rolling element bearings. The results below show a typical wheel bearing after 4000km of use. Lower values indicate a superior life and reduced losses from friction losses.
Genuine Bearings, Counterfeits and B Grade
This is a 100% Genuine NTN Bearing. It has been sourced directly from NTN Europe in Annecy, France. It is not B graded, counterfeit or an NTN labelled product from a third party. You can read more about this in the article Counterfeit NTN and SKF Bearings
There have been widespread reports of counterfeit and substandard (B Grade) bearings being sold to unsuspecting customers in the media. Using these items often results in diminished performance, reduced life and sometimes injury to personnel.
Genuine NTN vs Other NTN
The pictures below show two NTN Bearings, the bearing on the left is from Hambini via NTN in France, and the one on the right was purchased from a well-known UK bicycle bearing distributor; they claimed to have sourced their bearings from NTN. From the outside, they both look to be identical, and the packaging that they came in appeared to be identical. Further inspection of the bearings revealed largely similar seals that would be indiscernible to the average consumer. However, upon disassembly, several discrepancies were noted; the most obvious was the 40% higher ball count on the Hambini supplied bearing. Additionally, the Hambini supplied NTN bearing had a riveted metal cage, the distributor's bearing was folded sheet metal. Folded metal cages have considerably poorer load and stiffness ratings. The distributor bearing had failed after only 600km, a root cause investigation was conducted, and the bearings were found to be of dubious quality with an unverifiable supply chain.
Hambini Engineering and Technical Support
Hambini (the individual) is well known for his encyclopedic knowledge of Aerodynamics and tribology (Bearing Engineering) and is a recognized industry expert, he is a Chartered Aerospace Engineer, and his works are often referenced in technical publications and presentations. He has sat on numerous technical committees. On the internet, his training videos on YouTube have been seen over 1 million times. The technical reference documents and publications on the Hambini website alone receive well over 25,000 unique monthly visitors.
The average satisfaction rating from customers is over 97%, one of the highest in the industry. This satisfaction rating has been achieved by providing technically superior products, world-class design and manufacturing engineering, fastidious quality control and unrivalled technical support.
If you have a question, however big or small, you can email support@hambini.com or use the contact form.
Links
Additional information
Inside Diameter (d) | |
---|---|
Outside Diameter (D) | |
Width (b) | |
Manufacturer | |
Seal | |
Bearing Number |
Mr Richard Neil –
Super smooth genuine bearings
richard j. –
Lee Williams –
Denys B. –
Edwin G. –
Always a pleasure to deal with
Craig A Cooper –
your detailed analysis of NTN bearings vs. ceramic bearings convinced me to use NTN in my new DT Swiss road wheels and change out the bearings in my bottom bracket.
Paul H. –
Wilmar Gerstgrasser –
Product of high quality, time of delivery was fine.
Daniel Gomes –
Great service, prompt response to questions and great produt. Already installed and performing great!
Nick A. –
Perfect
Khalid AL muhairi –
Best quality of bearing. I give 5 start
Lee Wheatcroft –
Awsome
Donnacha H. –
Excellent service and product as usual from Hambini. Quick delivery too. Highly recommend
Michael B. –
Swapped out some CeramicSpeed wheel bearings for these – am now a believer! Nice one
Devery Andrews –
Matthew D. –
Anonymous –
Anonymous –
Everything is top notch apart from post expenses 🙂
John –
Anonymous –
Raul O. –
Anonymous –
Hambini is the man! Fast service and excellent product quality.
Michael Conner –
JACK Emery H. –
Amazing service and quick mailing! Those bearing were part of the reason for two Florida USA TT championships.
Joseph –
Exactly as described, dispatched very quickly.
Adam T. –
Quality bearings. Smooooth!
Anonymous –
Hambini loves big pens is
rob claxton –
Genuine bearings super fast delivery why go anywhere else, Hambini fitted me one of his BB 3 years ago and bearings and still going strong