Hambini

Showing all 4 results

  • Hambini Racing PF30A Bottom Bracket 30mm BB30 Long Axle Crankset (Black)

    £233.00 Ex. VAT

    This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.

    Read moreDone

    Join the waitlist to be emailed when this product becomes available

  • Hambini Racing PF30A Bottom Bracket Shimano Crankset (Black)

    £248.00 Ex. VAT

    This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.

    Read moreDone

    Join the waitlist to be emailed when this product becomes available

  • Hambini Racing PF30A Bottom Bracket SRAM DUB Crankset (Black)

    £271.00 Ex. VAT

    This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.

    Read moreDone

    Join the waitlist to be emailed when this product becomes available

  • Hambini Trek BB90 Bearing Kit Shimano Crankset

    £173.00 Ex. VAT

    This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.

    Add to cartDone

End of content

End of content