-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 5.00 out of 5
£221.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 MTB Crankset (Deore, SLX, XT, XTR) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB92 Bottom Bracket (41mm Nominal Inside Diameter x 92mm wide).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BBright30mmBlack-1-300x300.jpg)
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BBrightShimanoBlack-1-300x300.jpg)
Rated 4.97 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190627-205918-1-300x300.jpg)
Rated 5.00 out of 5
£297.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/bbphoto14-300x300.jpg)
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/bbphoto14-1-300x300.jpg)
Rated 5.00 out of 5
£248.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20170723-140418-1-300x300.jpg)
Rated 5.00 out of 5
£271.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190307-205742-scaled-300x300.jpg)
Rated 4.87 out of 5
£173.00 Ex. VAT
This bearing kit is for use on bicycles that use the BB90 standard – typically these are Trek. It consists of 2 bearings at the top end of the size range and a pair of top hats to interface a Shimano Crankset.
End of content
End of content