Showing 1–12 of 17 results
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BB386EVO Bottom Bracket (46mm Nominal Inside Diameter x 86.5mm wide). A lot of manufacturers refer to this standard as BB386, without the EVO.
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
This bottom bracket is designed to interface a SRAM DUB 28.99mm (29.00mm) Crankset with a bike frame that uses a T47 Bottom Bracket (68mm wide). This is often called threadfit.
End of content
End of content
No products in the cart.