-
Rated 5.00 out of 5
£318.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A83 Bottom Bracket (42mm Nominal Inside Diameter x 83mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (Topstone). The center section of this bottom bracket is extremely narrow to allow it to miss the cable guide on Topstone bikes.
-
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
Rated 4.97 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
Rated 5.00 out of 5
£297.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
-
£287.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long axle (minimum 90.5m DBCA) Crankset with a bike frame that uses an Italian Bottom Bracket.
-
Rated 5.00 out of 5
£279.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2Ā Crankset with a bike frame that uses an Italian Bottom Bracket (70mm). This is a popular bottom bracket used on Pinnarello Bikes
-
Rated 5.00 out of 5
£315.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUBĀ Crankset with a bike frame that uses an Italian Bottom Bracket (70mm).
-
Rated 5.00 out of 5
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
-
Rated 5.00 out of 5
£306.00 Ex. VAT
This bottom bracket is designed to interface a Shimano Hollowtech 2 (Dura Ace, Ultegra, 105 etc) or compatible crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. Please note that newer Colnago bikes are using T47 86.5 Bottom Brackets,The Picture is for illustration purposes
-
Rated 5.00 out of 5
£341.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
-
Rated 5.00 out of 5
£487.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUBĀ Crankset with a bike frame that uses an ItalianĀ Bottom Bracket. It is made of Titanium
End of content
End of content