-
![](https://www.hambini.com/wp-content/uploads/2019/12/20190318-133939-1-300x300.jpg)
Rated 4.94 out of 5
£186.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![BB30A Necked](https://www.hambini.com/wp-content/uploads/2022/03/20220224-181816-scaled-300x300.jpg)
Rated 4.93 out of 5
£312.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A Bottom Bracket (42mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (CAAD and Synapse).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 4.96 out of 5
£245.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![BB86 Necked](https://www.hambini.com/wp-content/uploads/2021/12/20210918-112757-scaled-300x300.jpg)
Rated 4.95 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). This bottom bracket has a narrowed center section to avoid obstructions, most Scott and BMC bikes require this variant of BB86 Bottom Bracket.
-
![BB86 BB92 Thread Together](https://www.hambini.com/wp-content/uploads/2021/09/20210907-184024-scaled-300x300.jpg)
Rated 5.00 out of 5
£269.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide). The thread together design will fit in any BB86 frame and is especially suited for Giant Bikes.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 5.00 out of 5
£295.00 Ex. VAT
This bottom bracket is designed to interface a SRAM GXP Crankset with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/BB86ShimanoBlack-1-300x300.jpg)
Rated 5.00 out of 5
£221.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 MTB Crankset (Deore, SLX, XT, XTR) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB92 Bottom Bracket (41mm Nominal Inside Diameter x 92mm wide).
-
![](https://www.hambini.com/wp-content/uploads/2019/12/bbphoto14-300x300.jpg)
Rated 5.00 out of 5
£267.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum 90.5mm DBCA) with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/bbphoto14-1-300x300.jpg)
Rated 5.00 out of 5
£248.00 Ex. VAT
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
-
![](https://www.hambini.com/wp-content/uploads/2019/12/20170723-140418-1-300x300.jpg)
Rated 5.00 out of 5
£271.00 Ex. VAT
This bottom bracket is designed to interface a 29mm SRAM DUB Crankset with a bike frame that uses a PF30A Bottom Bracket (46mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale Bikes such as the Systemsix.
End of content
End of content