Hambini Racing T45 Colnago Bottom Bracket SRAM DUB
£341.00 Ex. VAT
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes. The Picture is for illustration purposes
Out of stock
Description
This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T45 Bottom Bracket (82.5mm wide). This is often called threadfit 82.5, this is almost exclusively used on Colnago bikes.
- T45 x 82.5 Threaded. 45×1.0mm
- Drive side has a Left Hand Thread, Non Drive Side has a Right Handed Thread
- Designed for SRAM DUB Cranksets with a 28.99mm axle diameter
- The drive and non drive sides are aligned via an internal male/female sleeve
- This bottom bracket has been designed to offer easy servicing, it is not a throw away item, it has been designed to allow easy changing of bearings which are a standard part
- Non contacting Seals
- SRAM Axles have varying DBCA, please read more about this here
- Tool Requirements, these are shown on the drawing in the picture gallery
- 52mm Outside Diameter
- 12 Notches
- 51.7mm PCD (Pitch Circle Diameter) R25.85mm
- 3.5mm notch diameter
- A suitable tool is available here
1 review for Hambini Racing T45 Colnago Bottom Bracket SRAM DUB
Q & A
Ask a question
There are no questions yet
Cecil O. –
The craftsmanship is superior to all.