23/10/2020 T47 68mm to Shimano bottom brackets will be coming soon.
02/10/2020 Please note there may be a delay of a few days for responses to emails following the crash into a taxi and the ongoing recovery. Apologies in advance.
10/07/2020 Merch is here!!! This range is being expanded continually. Click here
Hambini BSA Threaded Bottom Bracket – Now Available
A lot of people have shown interest in the BSA bottom bracket that was featured in the video below.
A product and information page is available here. This bottom bracket has been released
One of my viewers contacted me about an issue he was having with the installation of a set of NTN bearings. He purchased what he believed to be Loctite 641 from an online supplier, this was promptly delivered with a label indicating it to be “high strength”. This is incorrect as high strength Loctite is […]
If you are about to buy a Cervelo bike, watch this video. It shows the appalling tolerances the bike frames are made to. The bottom bracket pressfit specification is so bad, neither NTN or SKF will warranty their bearings in it. This particular frame had misalignment between the two halves of the frame body.
There are various camps out there on the internet that swear by threaded bottom brackets as a means to avoid creaking. This video below shows the pro’s and con’s of both.
I have had a number of cyclists contact me with issues around NTN and SKF bearings being fitted at bike shops and failing within a fairly short period of time. A number of these cyclists have sent me the bearings back to look at and I have found a large number of bearings to be […]
A question that crops up frequently is with regards to Specialized’s OSBB bottom bracket and what size it is exactly. The short answer is OSBB comes in 3 variants which are all called OSBB. 46×61, 42×68 and 46×73. A summary table is below, with the detailed drawings below that. Variant (Diameter x Width) (mm) Application […]