Hambini Racing T47i T47-86.5 Bottom Bracket SRAM DUB (TREK)

(4 customer reviews)

£295.00 Ex. VAT

This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes. The Picture is for illustration purposes

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: T47-86-DUB Category:

Description

This bottom bracket is designed to interface a SRAM DUB Crankset with a bike frame that uses a T47 Bottom Bracket (86.5mm wide). This is often called threadfit or T47i and a variant of this is used on Trek bikes.

  • T47 x 86.5 Threaded. 47×1.0mm
  • Will work with TREK T47i bikes, these have an 85.5mm wide shell
  • Drive side has a Left Hand Thread, Non Drive Side has a Right Handed Thread
  • Designed for SRAM DUB Cranksets with a 28.99mm axle diameter
  • The drive and non drive sides are aligned via an internal male/female sleeve
  • Top of the range 6806 SKF/NTN/FAG/NSK bearings fitted as standard
  • This bottom bracket has been designed to offer easy servicing, it is not a throw away item, it has been designed to allow easy changing of bearings which are a standard part
  • Non contacting Seals
  • SRAM Axles have varying DBCA, please read more about this here
  • Tool Requirements, these are shown on the drawing in the picture gallery
    • 52mm Outside Diameter
    • 12 Notches
    • 51.7mm PCD (Pitch Circle Diameter) R25.85mm
    • 3.5mm notch diameter
  • A suitable tool is available here

Additional information

Crankset Type

Frame

Manufacturer

4 reviews for Hambini Racing T47i T47-86.5 Bottom Bracket SRAM DUB (TREK)

  1. Patrick Byrnes

    When purchasing an item like this, the thing that really makes the difference, is when you contact the seller for advice and they come back to you within minutes. Not only that, they (Hambini) follows up and makes sure that everything is cool. I’d have absolutely no hesitation in recommending Hambini, and his products.

  2. Ray O.

    Both road bikes are now running Hambini BB. (BB386 and Trek T47)
    Thanks Hambini!

  3. Dave D

    Beautifully crafted. Feels so smooth w new SRAM Group Set. Thank you Hambini!

  4. David D.

    Mechanics liked install tool. The bike stopped creaking. Its super smooth pedaling. Looks rad. Amazing Quality.

Add a review

Your email address will not be published. Required fields are marked *

Q & A

Will this also fit non-trek T47i frames with an 85.5mm shell width? Mike Kalajian asked on November 2, 2023

Yes it will.

admin answered on November 4, 2023 store manager
(0) (0)
what is the ft/lb torque spec when installing the Hambini Racing T47 in a 2022 Domane BB Shell? Dick Spear asked on April 3, 2022

Approximately 30Nm. Technically, the bottom bracket will self tighten as you pedal. this assumes nothing is binding.

admin answered on April 4, 2022 store manager
(0) (0)

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: