Pressfit vs Threaded Bottom Brackets
There are various camps out there on the internet that swear by threaded bottom brackets as a means to avoid creaking. This video below shows the pro’s and con’s of both.
There are various camps out there on the internet that swear by threaded bottom brackets as a means to avoid creaking. This video below shows the pro’s and con’s of both.
The Winspace Hyper are highly regarded, they have very good aerodynamic properties and are comfortably one of the fastest wheels you can buy. The Winspace hubs use standard 6000 series bearings of common sizes. This video shows you how to remove the bearings and replace them if they are worn or you want a bit…
9Velo is a relatively new company based in the Chinese coastal city of Xiamen. They are well versed in the manufacture of wheels with a claimed 50 years+ of combined engineering experience within the organisation. These CD55 wheels are the first to feature their new axial freewheel system which has up to 54 teeth of engagement. This is a well engineered wheelset and good value for money.
This bargain Velobuild Pinarello lookalike bike frame arrived at Hambini HQ with high expectations. They were quickly dashed when a string of faults was found, accompanied by fairly comical claims of what is and is not acceptable by QA standards.
This Teardown covers the Engineering behind the ROTOR 2InPower 30mm Crankset. It focuses on the materials, manufacturing, tolerances,, bearing preload system and system stiffness.
9Velo is a relatively new company, but the individuals behind it have been in the carbon fibre wheel industry for a considerable length of time. These gravel wheels have some of the highest levels of manufacturing quality that I have ever seen. The hubs are probably the best ones you can buy; they make DT Swiss units look like rough copies in comparison.
No products in the cart.
Please note: any orders placed between 28 March and 01 April will be dispatched on 02 April due to a public holiday in England Dismiss