Pressfit vs Threaded Bottom Brackets
There are various camps out there on the internet that swear by threaded bottom brackets as a means to avoid creaking. This video below shows the pro’s and con’s of both.
There are various camps out there on the internet that swear by threaded bottom brackets as a means to avoid creaking. This video below shows the pro’s and con’s of both.
Introduction Shimano have had some issues with their high end cranksets in recent times. It seems as though the Ultegra and Dura Ace cranksets are the primary units affected. There have been many reports of the cranksets fracturing in half. Some of these have been under modest load on turbo trainers whilst others have been…
Thanks to Grant from GC Performance YouTube channel for sending in his AbsoluteBLACK Hollowcage OSPW. This has now come in for review. You can find out some other attributes of the AbsoluteBLACK Hollowcage OSPW in the pre-review located here
The Elves Vanyar is a one piece moulded carbon fiber frame produced by the Taiwanese/Chinese company Elves. The frame was sent in by a viewer and thus the purchase was anonymous. Overall the frame was nothing more than average albeit no worse than the likes of the named brands Cannondale/Canyon etc
9Velo is a relatively new company, but the individuals behind it have been in the carbon fibre wheel industry for a considerable length of time. These gravel wheels have some of the highest levels of manufacturing quality that I have ever seen. The hubs are probably the best ones you can buy; they make DT Swiss units look like rough copies in comparison.
The aerodynamic performance of wheels often grabs the headlines and the marketing budget but the reality is the hubs and the bearings within them will have more of a performance differential for the average cyclist. As an example, the power differential between wheels of an equivalent depth at speeds of less than 35km/h will only…
Introduction I have had a number of cyclists contact me with issues around NTN and SKF bearings being fitted at bike shops and failing within a fairly short period of time. A number of these cyclists have sent me the bearings back to look at and I have found a large number of bearings to…
No products in the cart.