Hambini BB30 PF30 BB386 Bottom Bracket installation and Removal Kit

Rating:
99% of 100
£33.00
Out of stock
SKU
HambiniBB30Kit

This kit allows the easy removal and installation of all BB30 bottom brackets

Bearing Press Tool BB30/PF30

  • Machined Delrin installation adaptors/plates. 
  • Small recess chamfer to prevent the wrong part of the bearing being pressed. 
  • Dimensions and tolerances as specified by major bearing manufacturers SKF, NTN, FAG and INA
  • Uses M12 studbar in grade 12.9 (19mm nuts). This standard is much stiffer, stronger and more robust than other presses that use M10 (17mm nuts) stud bar
  • Entire Tool is rated to 755kg of clamping force. Most bike bearings are installed with 40-50kg of clamping force.
  • This Hambini tool pushes both bearings in at the same time. Some other tools push bearings in one at a time, this places an extreme stress on the corner of the bottom bracket shell and can cause cracking of the frame (especially if you have carbon). The Hambini Tool uses the recommended installation method of Cervelo, Cannondale, SKF, NTN, FAG, Canyon, Trek...
  • Designed and manufactured in the UK by Hambini 

Bearing Removal Tool BB30/PF30

  • Works with all BB30 bike frames and PF30 bottom brackets WHICH DO NOT HAVE AN INTERNAL LIP. It will also remove the bearings only from BB386 bottom brackets
  • Requires no hammers to remove the bearings
  • Controlled process, does not shock the bike frame with hammer blows
  • Uses M12 studbar in grade 12.9
  • Carbon steel puller
  • Machined Delrin sleeve 
  • Rated to 120kg of pulling force. Most bike bearings are installed with 40-50kg of retention.
  • Will remove seized bearings
  • Designed and manufactured in the UK by Hambini

SEE THE VIDEO BELOW SHOWING THESE TOOLS IN ACTION AND HOW TO USE THEM
 

Please view the video below which shows the correct operation of the extraction tool

Write Your Own Review
You're reviewing:Hambini BB30 PF30 BB386 Bottom Bracket installation and Removal Kit
Your Rating
Hambini Engineering, Unit 11386, 13 Freeland Park, Wareham Road, Poole, Dorset BH16 6FH UK